0121 561 5616
Order Cutting Oils
We can give practical advice on which oils to choose for your specific cutting application.
Sawcraft HD Cleaner is a unique combination of surface active agents, sequestrants and alkaline builders. Excellent performance with industrial applications due to its ability to rapidly lift dirt, grime and oil from metal, glass, plastic and painted surfaces.
- Easily and gently removes dirt and grime.
- Does not contain ingredients which accelerate metal corrosion.
- Safe on aluminium, metal surfaces, glass and rubber.
- Ideal for hot or cold pressure wash machines.
- Effective in hard and soft waters.
- Contains rinse off additives.
- Painted surfaces
Application & Mix Ratio
Use up to 1:150 parts water via machine dilution system. Allow a few minutes contact time and then remove with a high pressured jet.
Pre-dilute at a mix ratio 1:40 in water and brush/spray over the surface area. Allow a few minutes conatct time, the rinse or wipe the surface. It is advisable to pre-wet the surface prior to using this method to remove loose dirt and avoid scratching.
The key to successful application of our (and other) cutting fluids, is to direct as much coolant as possible in a continuous stream as closely as possible to the cutting edge.
This achieves the three primary aims; to lubricate the chip-blade interface, to transfer heat from the blade, and to remove the chip as cleanly and as quickly as possible.