0121 561 5616
Hydraulic Oil 46
Order Cutting Oils
We can give practical advice on which oils to choose for your specific cutting application.
Hydraulic Oil 46 is a high performance hydraulic oil based on very highly refined mineral oil and offers outstanding antiwear, corrosion protection and antioxidant characteristics. In addition the products exhibits superior air release and demulsification as well as good filtration properties even when extremely fine filters are used.
Hydraulic oil 46 is a high viscosity index product and will therefore give effective performance in high temperature environments.
Available in 25L, 215L, IBC
- Highly refined mineral oils
- Outstanding antiwear
- Corrosion protection
- Antioxidant characteristics
- Superior air release
- Effective performance in high temperature environments
Principle use in hydraulic systems that require anti wear minerals.
Application & Mix Ratio
It is designed proincipally for idustrial applications but can be used whenever the following specifications are required….
- DIN 51524 part 2 & 3 (HLP, HVLP)
- AFNOR NF E 48-603 (HM, HV)
- SIS SS 155434
- VDMA 24318
- Hoesch HWN 2333
- Thyssen TH N-256132
- CETP RP 91 H (HM, HV)
- SEB 181 222
- U.S Steel 126 & 127
- Sperry Vickers M-2950-S and I-286-S
- Denison Filterability TP 02100
The key to successful application of our (and other) cutting fluids, is to direct as much coolant as possible in a continuous stream as closely as possible to the cutting edge.
This achieves the three primary aims; to lubricate the chip-blade interface, to transfer heat from the blade, and to remove the chip as cleanly and as quickly as possible.