0121 561 5616
Screw Cutting Oil
Order Cutting Oils
We can give practical advice on which oils to choose for your specific cutting application.
Sawcraft Screw Cutting Oil is a multi purpose oil designed to be used neat. It is manufactured from premium quality solvent refined mineral oils and active extreme pressure additives which form a light coloured low odour product which is pleasant for the operator to use.
Chlorine free product.
Available in 5L, 25L, 215L, IBC
- Contains highly refined mineral oils and extreme pressure additives.
- Excellent surface finish
- Low odour, operator friendly
- Provides extended tool life
- Economical in use
Designed to be used on ferrous metals for medium to high severity operations.
Not to be used on yellow metals which may stain.
Application & Mix Ratio
Operations including heavy turning, tapping and screwing on materials.
The key to successful application of our (and other) cutting fluids, is to direct as much coolant as possible in a continuous stream as closely as possible to the cutting edge.
This achieves the three primary aims; to lubricate the chip-blade interface, to transfer heat from the blade, and to remove the chip as cleanly and as quickly as possible.