Cutting Oils
Jaycool Soluble Cutting Oils
Jaycool biostable cutting oils are suitable for all ferrous metals, including some stainless steels. This odourless blue concentrate contains mineral oil to improve cutting performance and aid machine tool lubrication.
A recommended mix with water of 10:1 or 15:1 produces a stain free performance on all metals including brass and aluminium.
Available Sizes
Jaycool Soluble Cutting Oil is available in 25 litre drums and 215 litre barrels
Jaycut Cutting Oils
Jaycut cutting oil has been designed for arduous operations on difficult metals or in adverse machine conditions.
There is a larger quantity of mineral oil than is normally found in this type of product ensuring maximum protection for the life of the sawblade.
Available Sizes
Jaycut cutting oil is available in 25 litre drums and 215 litre barrels
Jaymist
Jaymist is a blend of highly refined esters which give outstanding lubricity and cutting performance. This product is more resistant to oxidation than most vegetable oils of it's kind, whose oxidation products leave gummy deposits during metal cutting.
Jaymist's principal application is in spray-misting equipment and has proved very successful with a variety of metals.
Available Sizes
Jaymist is available in 5, 20 and 25 litre drums and 215 litre barrels.
Order Cutting Oils
We can give practical advice on which oils to choose for your specific cutting application.
Call us on 0121 561 5616 for more information about our Jaycool, Jaycut and Jaymist products, or to proceed with placing an order.
Application Advice
The key to successful application of our (and other) cutting fluids, is to direct as much coolant as possible in a continuous stream as closely as possible to the cutting edge.
This achieves the three primary aims; to lubricate the chip-blade interface, to transfer heat from the blade, and to remove the chip as cleanly and as quickly as possible.