Germany France
0121 561 5616 | 

High Production Circular Saws

Noritake high production circular sawing machines offer the most cost-effective cutting solution on the market for cutting all types of solid bar. The quick and easy setup of cutting parameters, speeds and feed rates allows the machine to perform at maximum capacity with minimal amount of supervision 24 hours a day. All machines are equipped with highly efficient and powerful vice clamps that produce burr free cuts along with the 3 point blade guides resulting in very tight tolerances that often remove the need for secondary operation.

  • Competitively priced machines
  • Finance packages available
  • Extensive warranty
  • Technical team on hand to offer support and advice
  • We provide the complete cutting solution. Our wide range of bandsaw blades and cutting oils complement the machine and allow us to offer packages specific to your application.

 

Noritake NCS-5/75 High Production Circular Saw

Noritake Co., Limited


Round

10 - 76.2mm

Square

10 - 65mm

Machine BuildBlade Guide & CoolantMaterial Feeding & ClampingMachine Control & AutomationInclined Magazine Loader

Machine Build

Extreme heavy duty, robust construction (Total weight = 1,700 Kgs). Single piece saw unit frame design for additional machine rigidity. Frame design allows for maximum swarf removal.

Blade Guide & Coolant

Fixed Carbide blade guide blocks to ensure zero blade deviation (NO operator adjustment required). Critical guide units fitted both above AND below the cut piece. Swarf removal blade brush assembly.

Material Feeding & Clamping

Automatic setting of double (both sides of the saw blade) horizontal cutting vise clamp. Automatic setting of the Vertical material clamp. Automatic setting of the Gripper feed carriage clamp. Vise jaws feature replaceable hardened wear plate inserts. Single Gripper feed stroke of 600 mm with automatic multi feed facility for longer cut lengths. “Floating” Gripper Feed carriage to improve handling of slightly bowed material. (Max 2mm per 1000 mm and a maximum of 5 mm per starting length).

Machine Control & Automation

Mitsubishi CNC machine control system. Mitsubishi “Colour” operator friendly touch screen for simple and easy use. Pre programmed setting of material grades and types automatically setting all sawing parameters. Automatic blade recommendation system. Multiple job memory facility for regular work. Comprehensive error message system for easy fault finding.

Inclined Magazine Loader

Robust automatic Inclined (slide) loading magazine unit. From 3M to 6M starting length capacity. Standard Loading width capacity = 800 mm. Maximum weight capacity = 1,700 Kgs. Quick and simple setting via a single graduated setting point near machine control panel Standard magazine loader will ONLY load round material automatically (Sections on request).

Noritake NCS-7/80 High Production Circular Saw

Noritake Co., Limited


Round

10 - 80mm

Square

10 -65mm

Machine BuildBlade guide and coolantMaterial feeding and clampingMachine control and automationInclined magazine loader

Machine Build

Extreme heavy duty, robust construction (Total weight = 2,800 Kgs). Single piece saw unit frame design for additional machine rigidity. Frame design allows for maximum swarf removal.

Blade guide and coolant

Fixed Carbide blade guide blocks to ensure zero blade deviation (NO operator adjustment required). Critical guide units fitted both above AND below the cut piece. Swarf removal blade brush assembly.

Material feeding and clamping

Automatic setting of double (both sides of the saw blade) horizontal cutting vise clamp. Automatic setting of the Vertical material clamp. Automatic setting of the Gripper feed carriage clamp. Vise jaws feature replaceable hardened wear plate inserts. Single Gripper feed stroke of 750 mm with automatic multi feed facility for longer cut lengths. “Floating” Gripper Feed carriage to improve handling of slightly bowed material. (Max 2mm per 1000 mm and a maximum of 5 mm per starting length).

Machine control and automation

Mitsubishi CNC machine control system. Mitsubishi “Colour” operator friendly touch screen for simple and easy use. Pre programmed setting of material grades and types automatically setting all sawing parameters. Automatic blade recommendation system. Multiple job memory facility for regular work. Comprehensive error message system for easy fault finding.

Inclined magazine loader

Robust automatic Inclined (slide) loading magazine unit. From 3M to 6M starting length capacity. Standard Loading width capacity = 800 mm. Maximum weight capacity = 1,700 Kgs. Quick and simple setting via a single graduated setting point near machine control panel Standard magazine loader will ONLY load round material automatically (Sections on request).

Noritake NCS-5/100 High Production Circular Saw

Noritake Co., Limited


Round

20 -101.6mm

Square

20 -80mm

Machine BuildBlade Guide & CoolantMaterial Feeding & ClampingMachine Control & AutomationInclined Magazine Loader

Machine Build

Extreme heavy duty, robust construction (saw unit alone = 2,800 Kgs). Single piece saw unit frame design for additional machine rigidity. Frame design allows for maximum swarf removal. Specially designed ultra robust cutting head. Motor Power 15 Kw. Inverter controlled blade speed suitable for a range of materials (50-160 rpm). Standard saw blade diameter = 360 mm Dia x 2.6 mm wide. Cutting head movement is controlled via an electric axis. Cutting head mounted on high precision guides with automatic lubrication system.

Blade Guide & Coolant

Fixed Carbide blade guide blocks to ensure zero blade deviation (NO operator adjustment required). Critical Guide units fitted both above AND below the cut piece. Swarf removal blade brush assembly

Material Feeding & Clamping

Automatic setting of horizontal cutting vise clamp. Automatic setting of the Vertical material clamp. Automatic setting of the Gripper feed carriage clamp. Single Gripper feed stroke of 600 mm with automatic multi feed facility for longer cut lengths.

Machine Control & Automation

Mitsubishi CNC machine control system. Mitsubishi “Colour” Operator friendly touch screen for simple and easy use. Pre programmed setting of material grades and types automatically setting all sawing parameters. Automatic blade recommendation system. Multiple job memory facility for regular work. Comprehensive error message system for easy fault finding.

Inclined Magazine Loader

Robust automatic Inclined (slide) loading magazine unit. 8000 MM starting length capacity. Standard Loading width capacity = 800 mm. Maximum weight capacity = 3,000 Kgs. Loading process cushioned using heavy duty shock absorber on each loading arm. Quick and simple setting via a single graduated setting point near machine control panel. Standard magazine loader will ONLY load round material automatically (Sections on request).

Noritake NCS-5/120 High Production Circular Saw

Noritake Co., Limited


Round

40 -120mm

Square

40 -80mm

Machine BuildBlade Guide & CoolantMaterial Feeding & ClampingMachine Control & AutomationInclined Magazine Loader

Machine Build

Extreme heavy duty, robust construction (Saw unit alone = 2,800 Kgs). Single piece saw unit frame design for additional machine rigidity. Frame design allows for maximum swarf removal. Specially designed ultra robust cutting head. Motor power 11 Kw (15 HP). Inverter controlled blade speed suitable for a range of materials (50-160 rpm). Standard saw blade diameter = 380 mm Dia x 2.6 mm wide. Cutting head movement is controlled via an Electric axis. Cutting head mounted on high precision guides with automatic lubrication system.

Blade Guide & Coolant

Fixed carbide blade guide blocks to ensure zero blade deviation (NO operator adjustment required). Critical guide units fitted both above AND below the cut piece. Swarf removal blade brush assembly.

Material Feeding & Clamping

Automatic setting of horizontal cutting vice clamp. Automatic setting of the Vertical material clamp. Automatic setting of the Gripper feed carriage clamp. Single Gripper feed stroke of 600 mm with automatic multi feed facility for longer cut lengths.

Machine Control & Automation

Mitsubishi CNC machine control system. Mitsubishi “Colour” operator friendly touch screen for simple and easy use. Pre programmed setting of material grades and types automatically setting all sawing parameters. Automatic blade recommendation system. Multiple job memory facility for regular work. Comprehensive error message system for easy fault finding.

Inclined Magazine Loader

Robust automatic inclined (slide) loading magazine unit. 8000mm starting length capacity. Standard loading width capacity = 800 mm. Maximum weight capacity = 3,000 Kgs. Loading process cushioned using heavy duty shock absorber on each loading arm. Quick and simple setting via a single graduated setting point near machine control panel. Standard magazine loader will ONLY load round material automatically (Sections on request).

Noritake NCS-5/160 High Production Circular Saw

Noritake Co., Limited


Round

60 -160mm

Square

60 -120mm

Machine BuildBlade Guide & CoolantMaterial Feeding & ClampingMachine Control & AutomationInclined Magazie Loader

Machine Build

Extreme heavy duty, robust construction (Saw unit alone = 3,100 Kgs). Single piece saw unit frame design for additional machine rigidity. Frame design allows for maximum swarf removal. Specially designed ultra robust cutting head. Motor power 15 Kw. Inverter controlled blade speed suitable for a range of materials (30-120 rpm). Standard saw blade diameter = 480 mm. Cutting head movement is controlled via an electric axis.

Blade Guide & Coolant

Fixed carbide blade guide blocks to ensure zero blade deviation (NO operator adjustment required). Critical guide units fitted both above AND below the cut piece. Micro lubrication coolant system c/w automatic low level machine warning fail safe unit. Swarf removal blade brush assembly.

Material Feeding & Clamping

Automatic setting of double (both sides of the saw blade) horizontal cutting vise clamp. Automatic setting of the vertical material clamp. Automatic setting of the gripper feed carriage clamp. Vise jaws feature replaceable hardened wear plate inserts. Single gripper feed stroke of 800 mm with automatic multi feed facility for longer cut lengths. Floating gripper feed carriage to improve handling of slightly bowed material. (Max 2mm per 1000mm and a maximum of 5mm per starting length).

Machine Control & Automation

Mitsubishi CNC machine control system. Mitsubishi “Colour” operator friendly touch screen for simple and easy use. Pre programmed setting of material grades and types automatically setting all sawing parameters. Automatic blade recommendation system. Multiple job memory facility for regular work. Comprehensive error message system for easy fault finding.

Inclined Magazie Loader

Robust automatic inclined (slide) loading magazine unit. 6m starting length capacity Standard loading width capacity = 870mm. Maximum weight capacity = 3,500 Kgs Quick and simple setting via a single graduated setting point near machine control panel. Standard magazine loader will ONLY load round material automatically (Sections on request).