Features
100 Programmable cut length and quantity positions for multiple job cutting and job storage.
Full colour touch screen panel with machine status indicators and error messages.
Dual blade controls of both blade feed rate and material pressure force.
Inverter controlled blade speed: 20 – 100 mpm, actual speed shown on display.
10HP (7.5Kw) ULTRA Heavy duty blade drive motor with overload protection.
A single stroke of 503mm with NC calculated multi shuffle up to 9999mm long.
Carbide pads controlled with hydraulic clamping for easy blade change and roller bearing guides.
Hydraulic blade tension control with blade breakage safety shutdown.
Mitsubishi PLC Control.
Full stroke material vises, No manual settings required control with double retracting carriage vise for improved handling of bent stock and reduced risk of material marking.
New Improved “CE” Full Mesh guarding, Interlocked blade covers, Blade motions detectors and mechanical lock on control cabinet doors.
Blade Drive, Guide & Coolant
Specially designed gearbox for high lateral pressure.
Blade speed indicator and settings are conveniently located on the operator control station.
Carbide blade guides are hydraulically clamped to ensure maximum squareness of cut.
The bearing guides eliminate blade stress by pre-aligning the blade before it enters the carbide guides. Two additional guides support the blade from above, providing additional penetrating force for faster cutting.
Hydraulically positioned guide arm is controlled from the operators station allowing optimal positioning for each job.
Automatic hydraulic blade tension to maximise blade life by reducing blade tension when the machine is not cutting.
Control & Automation
Dual feed valve system is easily and simply adjusted for the optimum cutting parameters.
Error code display for simple fault finding.
LCD screen displays: blade speed, blade feed and vise position.
Key pad entry of quantity and length of cut with automatic machine cut down at the end of a job or if the machine is out of material.
Ergonomically positioned control station at the front of the machine.
Control functions are clearly identified for ease of operation.
Material Feeding, Clamping Safety
Split front vise to allow automatic feeding down to a minimum possible scrap end length of 160mm long.
Full stroke hydraulic clamping of both front & rear vises.
Double retracting feed vise jaws to assist in working with slightly bent material and reduced risk of material marking.
Vise jaws feature replaceable hardened wear plates.
Blade slippage and or breakage safety switch to automatically shutdown the machine .
Interlocked blade band wheel cover guards.
